|Model number||Solar Cell||Maximum power (Pmax)||Operating temperature||Product application||Weight||Dimension||Warranty|
|RL-FM130||Monocrystalline||250W||-40℃ to +85℃||Class A||18.73kg||1118*700*68(mm)||12 month|
Included in the kit
250Wfolding solar panel will perform at its peak when it faces directly towards thesun.
1.When the locking handle is at 90 degree.The support legs are loose and the angle of the solar panel can be adjusted.
2.When the locking handle is at 45 degree.The support legs are locked and cannot move.
CONNECTINGYOUR SOLAR PANEL
1.Now that the panel is setup facingdirectly towards the sun. Proceed to connect the positive and negative clips toyou battery.
2.Always connect the battery clips to thebattery first, then insert the solar panel Anderson plug into the battery wireAnderson plug. You controller will then light up to show that it is working.
DISCONNECTING& STORING YOUR SOLAR PANEL
1.Disconnect the Anderson plug off thebattery clips first and then proceed to take the battery clips off the battery. 2.Roll the 5m extended wire neatly into thestorage clips behind the solar panel. NOTE:MAKE SURE NOT TO TWIST OR KINK THE WIRING IN AN UNNATURAL WAY.
3.NEVERSTORE YOUR SOLAR PANEL WITH THE BATTERY WIRE CONNECTED TO THE PANEL.
4.PLACETHE BATTERY WIRE SEPERATELY IN THE FRONT POCKET OF THE CARRY BAG.
TIP: For optimal performance through-out theday, set the panel to approximately 30° from the ground. Anywhere between 10°and 40° will gain the best power absorption across the course of the day.